Máy chế biến gỗ YRT-115

Giá: Liên hệ

Mô tả:Máy chế biến gỗ YRT-115 được xây dựng với hai bảng cho hoạt động hiệu quả cao hơn,tỷ lệ sản xuất cao lên đến 12 chiếc mỗi phút, không phải tháo cửa, độ sâu có thể được điều chỉnh thuận tiện.

Thông tin chi tiết

Máy chế biến gỗ YRT-115

Outstanding Features:

Built with two tables for higher efficiency operations.
High production rate up to 12 pcs per minute.
Pneumatically operated table longitudinal traverse.
Adjustable tenoning width.
The tenon without removing the door, depth can be conveniently adjusted.
Table tilts 20°.
Movable table to save time, and speed can be variable adjustment.
Convenient setup of tenon directions at horizontal, vertical and 45°.
Miter gauge provided on the table allows for cutting bevel tenons.
Oil bushings on the table support and the disk.
Centralized control panel provides convenient operations.
Designed for producing various types of tenon.
Variable table feed speed suits various types of wood material.

Convenient Setup Of Tenon Direction

Three tenon directions at horizontal, vertical and 45° can be fast changed by turning the positioning disk.

A mechanical meter is provided for high accuracy adjustment of tenon sizes

Oilless Bushings:

Eliminates the use of lubricator, the table support and the disk are equipped with oilless bushings. Manufactured from high tensile copper alloy for long service life, these bushings also feature impact resistance and maximum wear resistance

Disk Speed Controlled by Frequency Inverter (Optional)

When requested, a frequency inverter can be applied to control disk speed. It permits variable speed adjustment for various type of wood material. This device is recommanded when cutting plywood, MDF, and easily cracked panel.

24T Helical Cutterhead (optional)

1. Excellent for all soft and hard wood materials.
2. 360º cutting.
3. Fine chips.
4. No tearing.
5. Forced chip removing to eliminate repeated cutting.
6. Low noise, long service life, insert life up to 120 days.
7. 5 years warranty.

Cutterhead Structure (Standard)

1. Suitable for medium hardness wood materials.
2. Production rate 12 pcs per minute.
3. Tearing may occur when applying for high hardness wood materials.
4. Sharpening frequency is 6-7 days of operation.

Variable Cutter Feed Speed

The machine employs two speed regulator knobs to adjust the table feed forward and backward speeds. Variable feed speeds makes the machine ideal for cutting hard and soft woo

Thông số kỹ thuật của máy:

Model/ Kiểu máy	YRT-115
Spindle speed/ Tốc độ trục chính	6000 R.P.M.
Maximum tenon width/ Chiều rộng tối đa mộng	115+2R mm
Minimum tenon depth/ Chiều sâu tối thiểu cũa mộng
with standard tool/ Với công cụ tiêu chuẩn	10~45 mm
with special tools/ Với công cụ đặc biệt	8~90 mm
production rate/ Tỷ lệ sản xuất	12 pcs/min.
Table tilt/ Thông số nghiêng
upward / Trở lên	0~15°
downward/ Xuống	0~30°
Side/ Bên	0~20°
Spindle motor/ Động cơ trục chính	5HP
Cutter cycle motor/ Động cơ làm việc	1HP
Total horsepower/ Tổng công suất	4.5 kw (6 HP)
Others/ Thông số khác
Dust hood outlet diameter/ Đường kính outlet	Ø4" x 3
Working air pressure/ Áp suất làm việc	6 BAR
Machine dimensions/ Kích thước máy	1760x1150x1320 mm
Packing dimensions/ Kích thước đóng gói	1870x1220x1560 mm
Gross weight/ Trọng lượng	1200 kgs